SAFETY DATA SHEET
Collodion 2% in Amyl Acetate
1. IDENTIFICATION
Product Identifiers
Product Name:
Collodion 2% in Amyl Acetate
Other Names:
Collodion 2% in Amyl Acetate - non filtered, Collodion (Parlodion) 2% in Amyl Acetate.
Product Number(s):
12620-00, 12620-09817-BULK, 12620-20, 12620-30, 12620-34, EMS12620-00, EMS12620-30, EMS12620-34
CAS Number:
628-63-7
Recommended use of the chemical and restriction on use
Laboratory chemicals
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
11 Carlton Street
KIRWAN QLD 4817
Australia(07) 4773 9444www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
GHS02 Flame
Flam. Liq. 3 H226 Flammable liquid and vapour.
Flam. Liq. 3 H226 Flammable liquid and vapour.
Label Elements
Signal Words
Warning
Hazard Statement(s)
Flammable liquid and vapour.
Precautionary Statement(s)
Keep away from heat/sparks/open flames/hot surfaces. No smoking.
Keep container tightly closed.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting equipment.
Use only non-sparking tools.
Take precautionary measures against static discharge.
Wear protective gloves/protective clothing/eye protection/face protection.
Keep container tightly closed.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting equipment.
Use only non-sparking tools.
Take precautionary measures against static discharge.
Wear protective gloves/protective clothing/eye protection/face protection.
Primary route(s) of entry
Not available.,
Human Health
Inhalation:
Not available.
Ingestion:
Not available.
Eyes:
Not available.
Skin:
(or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower.
Environment
In case of fire: Use CO₂, powder or water spray for extinction.
Store in a well-ventilated place. Keep cool.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Store in a well-ventilated place. Keep cool.
Dispose of contents/container in accordance with local/regional/national/international regulations.
3. COMPOSITION/INFORMATION ON INGREDIENTS
No information available.
4. FIRST AID MEASURES
Ingestion
If symptoms persist consult doctor.
Inhalation
Supply fresh air; consult doctor in case of complaints.
Skin Contact
Generally the product does not irritate the skin.
Eye Contact
Rinse opened eye for several minutes under running water.
Other Information
No further relevant information available.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
CO₂, sand, extinguishing powder. Do not use water.
HAZCHEM
For safety reasons unsuitable extinguishing agents: Water with full jet.
Special protective equipment and precautions for fire fighters
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Environmental precautions
Do not allow to enter sewers/surface or ground water.
Methods and materials for containment and clean up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Do not flush with water or aqueous agents.
Do not flush with water or aqueous agents.
7. HANDLING AND STORAGE
Precautions for safe handling
No special precautions are necessary if used correctly.
Keep ignition sources away - Do not smoke.
Protect from heat.
Protect against electrostatic charges.
Keep ignition sources away - Do not smoke.
Protect from heat.
Protect against electrostatic charges.
Conditions for safe storage
Protect from heat and direct sunlight.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Material
TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
AMYL ACETATE, REAGENT
50ppm
270mg/m³
100ppm
541mg/m³
Engineering controls
Wash hands before breaks and at the end of work.
Personal protective equipment
Eye and face protection
Tightly sealed goggles.
Skin protection
Wear protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
Wear protective clothing.
Respiratory protection
Not required
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Clear liquid
Odour
Fruit-like
pH
Not determined
Vapour Pressure
5.3 hPa
Density
4.5g/cm³
Boiling Point
149.25°C (300.7 °F)
Melting Point
-70.8°C (-95.4 °F)
Solubility
1.8g/l
Specific Gravity of Density
Not available.
Flash Point
16 °C (60.8 °F)
Flammable (Explosive) Limits
Lower: 1 Vol%
Upper: 7.5 Vol%
Product is not explosive. However, formation of explosive air/vapour mixtures are possible.
Upper: 7.5 Vol%
Product is not explosive. However, formation of explosive air/vapour mixtures are possible.
Ignition Temperature
360°C
Formula
Not available.
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available.
Chemical stability
No decomposition if used according to specifications.
Possibility of hazardous reactions
No dangerous reactions known.
Conditions to avoid
No further relevant information available.
Incompatible materials
No further relevant information available.
11. TOXICOLOGICAL INFORMATION
Acute effects
628-63-7 AMYL ACETATE, REAGENT
Oral LD50 6500 mg/kg (rat)
Oral LD50 6500 mg/kg (rat)
Eye contact
No irritating effect.
Skin contact
No irritating effect.
Ingestion
Not available.
Inhalation
No sensitising effects known.
Toxicity and irritation
Not available.
12. ECOLOGICAL INFORMATION
Ecotoxicity
No further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
Water hazard class 1: slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
13. DISPOSAL CONSIDERATIONS
General information
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Disposal must be made according to official regulations.
Disposal must be made according to official regulations.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
For safety reasons unsuitable extinguishing agents: Water with full jet.
UN Number
UN1104
Proper shipping name
DOT: RQ Amyl acetates
ADR: 1104 AMYL ACETATES
IMDG, IATA: AMYL ACETATES
ADR: 1104 AMYL ACETATES
IMDG, IATA: AMYL ACETATES
Transport hazard class
Class 3 Flammable liquids
Packing group
III
Environmental hazard
Not applicable.
Special precautions for users
Warning: Flammable liquids.
Hazard identification number (Kemler code): 30
EMS Number: F-E
Stowage Category: A
Hazard identification number (Kemler code): 30
EMS Number: F-E
Stowage Category: A
Additional information
Transport/Additional information:
· DOT
· Quantity limitations: On passenger aircraft/rail: 60 L
On cargo aircraft only: 220 L
· Hazardous substance: 5000 lbs, 2270 kg
· ADR
· Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 mL
Maximum net quantity per outer packaging: 1000 mL
· IMDG
· Limited quantities (LQ): 5L
· Excepted quantities (EQ): Code: E1
Maximum net quantity per inner packaging: 30 mL
Maximum net quantity per outer packaging: 1000 ml
· DOT
· Quantity limitations: On passenger aircraft/rail: 60 L
On cargo aircraft only: 220 L
· Hazardous substance: 5000 lbs, 2270 kg
· ADR
· Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 mL
Maximum net quantity per outer packaging: 1000 mL
· IMDG
· Limited quantities (LQ): 5L
· Excepted quantities (EQ): Code: E1
Maximum net quantity per inner packaging: 30 mL
Maximum net quantity per outer packaging: 1000 ml
15. REGULATORY INFORMATION
Poisons Schedule Number
None of the ingredients is listed.
Other Information
A Chemical Safety Assessment has not been carried out.
16. OTHER INFORMATION
SDS preparation date
3 November 2025
Comments
· Abbreviations and acronyms:
ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International
Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
EINECS: European Inventory of Existing Commercial Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Flammable Liquids 3: Flammable liquids - Category 3
ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International
Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
EINECS: European Inventory of Existing Commercial Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Flammable Liquids 3: Flammable liquids - Category 3
References
EMS SDS Collodion (Parlodion) 2% in Amyl Acetate. 24/01/2023 https://www.emsdiasum.com/docs/technical/msds/12620-00.pdf
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.